https://motoairfilter.com Fri, 26 Jun 2026 07:13:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://motoairfilter.com/2026/06/bmw-r1300gs-adventure-2025-kn-high-flow-air-filter/ https://motoairfilter.com/2026/06/bmw-r1300gs-adventure-2025-kn-high-flow-air-filter/#comments Fri, 26 Jun 2026 07:13:43 +0000 https://motoairfilter.com/2026/06/bmw-r1300gs-adventure-2025-kn-high-flow-air-filter/





ASV Off Road Levers. Chain and Sprocket Kits. Controls, Lever and Handlebars. Rapid Bike Fuelling Modules. Sprint Motorcycle Air Filters. MG Biketec Tail Tidies. BMW R1300GS Adventure 2025 K&N High Flow Air Filter. (K&N Part Number BM-1324). Supplied as a pair (enough for one motorcycle). The #1 high-flow air filter in the world. K&N Engineering is the innovator of this unique cotton air filtration system. The High flow technology is the air filter choice for many racers and riders. It provides increased performance and outstanding protection to the engine. The Historic K&N red colour is from factory pre-oiling to enhance filtration efficiency. 4-6 layers of cotton gauze filter medium flows over 200% more air than paper air filter medium on a square inch by square inch basis. Accordion style pleats provide substantially larger filtration area over non-pleated fibres. Coated aluminium wire exterior for structural support and long filter life. High quality urethane or plastisol selected for performance and durability. (K&N Part Number BM-1324)?? Supplied as a pair (enough for one motorcycle) The #1 high-flow air filter in the world? K&N Powersports Filters K&N Engineering is the innovator of this unique cotton air filtration system. Ø Pre-oiled The Historic K&N red colour is from factory pre-oiling to enhance filtration efficiency. Ø Higher Filtration 4-6 layers of cotton gauze filter medium flows over 200% more air than paper air filter medium on a square inch by square inch basis. Ø Larger Surface Area Accordion style pleats provide substantially larger filtration area over non-pleated fibres. Ø Increased Flow Coated aluminium wire exterior for structural support and long filter life. Ø Perfect Seal High quality urethane or plastisol selected for performance and durability. Telephone number required for International Orders and recommended on UK orders also. We can supply a full VAT invoice upon request. Subject to the following conditions. Please help us to help you. You may require it on the event of a claim with your carrier. BMW R1150GS R1150 GS & Adventure (99-05) K&N Air Filter. Performance Friction Race Pads.

]]> https://motoairfilter.com/2026/06/bmw-r1300gs-adventure-2025-kn-high-flow-air-filter/feed/ 0 https://motoairfilter.com/2026/06/dna-air-filter-compatible-for-aprilia-sr-gt-400-25-26-pn-p-pg4sc21-01/ https://motoairfilter.com/2026/06/dna-air-filter-compatible-for-aprilia-sr-gt-400-25-26-pn-p-pg4sc21-01/#comments Thu, 25 Jun 2026 19:12:02 +0000 https://motoairfilter.com/2026/06/dna-air-filter-compatible-for-aprilia-sr-gt-400-25-26-pn-p-pg4sc21-01/





Air Filters & Intakes. Air Filter & Intakes. Electric Traps with Glue. Aprilia SR GT 400 (25-26) DNA Air Filter P-PG4SC21-01. OEM Air Filter Part Number: 1A017817, 1? 023584. DNA replacement air filters are designed to increase hp and acceleration while providing excellent filtration. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. They offer bigger air-flow, with almost 99% filtering efficiency. OEM Air Filter Air Flow : 91.6 CFM. DNA Air Filter Air Flow : 200.4 CFM. DNA Increased Air Flow : +118.39%. DNA Filtering Efficiency : 98-99%. This filter features DNA®’s advanced FCd (Full Contour design). A perfect airtight sealing and trouble free filter installation for the user is guaranteed. Installation of this new DNA Air filter is very easy; simply follow the installation instructions included in the workshop manual. The filtering efficiency is extremely high at 98-99% filtering efficiency (ISO 5011), with 4 layers of DNA®Cotton. The flow of this new DNA filter is +118.39% more than the stock filter! This DNA® filter is designed as a High Flow Air filter for:’ Road & City use. Filtering efficiency is the amount of “dirt” the filter can maintain (stop) and protect the engine efficiently. For example the DNA ® Filter for every 100 grams of dirt that it will receive, it will hold 98 – 99 grams, this applies even to fine dirt as small as 5 microns. DNA Test & Results. The DNA Flow and Dyno Tests. We test every single filter. The DNA Air Flow Tests. For the air flow tests, we use the most advanced flow bench available today. The ROTRONICS FlowScan, is a totally computerized flow bench that measures. Mass of the air. Flow of the air. Temperature of the air. Speed of the air at various points (Pitot tubes). Absolute humidity of the air. The complete procedure is automated and computer controlled, eliminating human errors. The DNA Dyno Tests. For the Dyno Tests, we use the industry standard Dynojet chassis dyno equipped with eddy current load control, Dynojet 250LC. Our dyno cell is equipped with a variable flow air cooling system, designed to precisely simulate real world conditions. The Anatomy of a DNA High Performance Filter. This is what Power is made of! A DNA High Performance Filter is a high quality, next generation multilayer cotton gauze, flameproof, oil impregnated air filter. This very special cotton is designed by DNA’s R&D engineers for High Performance filtering purposes. The basic media is a non woven surgical cotton gauze with a modified TEX & THREAD, with extremely high strength of break. This unique cotton media, actually is a “hairy hybrid” featuring extremely high air flow rates and excellent filtering efficiency that exceeds 98%. The DNA Wire Mesh. The DNA wire mesh, is a very special material designed by DNA’s R&D engineers. Made out of marine grade 5000 series Aluminum, features a unique “wrap & fill” and precisely calculated wire diameter, to have the necessary high tensile strength and elasticity to last a lifetime. Additionaly it is protected against oxidation by a fine layer of epoxy coating. The DNA wire mesh is designed to perfectly support the cotton layers and at the same time not restrict the air flow. The DNA Filtering Media. The DNA Filtering Media consists of 4 layers of DNA cotton, sandwiched between 2 layers of DNA wire mesh, precisely pleated all together. We produce a very wide selection of media, starting from 8 mm to 50 mm height. With an infinite size of “Pitch”. Actually we can choose from an unlimited combination of DNA Filtering Media when designing a new filter. Another important feature of our filtering media is the “Large pleat edge radius”. This feature allows the edge to be an active part of the filtering media. Instead of a “dead” inactive area as our competitors is. The result is a unified high air flow of the filter. The only drawback of this design is that the media is very sensitive during production before molding and must be handled with extreme care, increasing the production cost. The DNA Filter Oil. This is an extremely important part of the DNA filter. As soon as the DNA Oil is added to the cotton media, the cotton is “static charged” and transformed into an unbeatable filtering material! To achieve this fantastic result we have developed a unique air filter oil formula. The specifications of our DNA Air Filter Oil are as impressive as our filters are. Humidity will not attack the oil, even if the filter is submersed in water. The flow of the filter remains unchanged even under extreme rainy conditions with high humidity. (We have seen many competitors’ filters transformed into a “milky mess” when it rains, severely reducing the performance of the engine). The oil has low viscosity, plus very high temperature resistance and stability. It will uniformly spread and stay on the filter regardless the temperature. Additionaly, it is UV resistant and easily soluble to assist cleaning the filter. The DNA PU (elastomer polyurethane). The DNA PU is a thixotropic material, that we use to manufacture the high quality “frame” of the filter, with unique material specifications. High tensile strength with the necessary hardness for each application, high temperature, fuel and oil resistance, the DNA PU will keep the filtering media in place, it will absorb vibration and will last for a life-time. The DNA EVA (Ethylene Vinyl Acetate polymer) closed cell seals. We use only high quality EVA seals. Precisely cut and factory installed (glued) using industrial grade adhesive, guaranty a perfect airtight sealing and trouble free filter installation for the user. The DNA EVA seals and the industrial adhesive are fuel, oil and temperature resistant. Additionally the DNA cleaner will not affect them when the filter is cleaned! The DNA FCd design technology. The DNA FCd design or “Welcome to the Future”! At least 20% and up to 80% more filtration area, using DNA FCd technology is common. The unique revolutionary design, an innovation by DNA, allows the pleated filtering media to follow precisely the air box contour, regardless the complexity of the shape, seriously increasing air flow. Taking advantage of the complete footprint of the air box, we eliminate “dead spots” that rob power. If the area is there why not use it! The DNA High Performance Air Filter in action. It is a dirty job, but somebody has to do it! Find out how a DNA High Performance Filter works to protect your engine efficiently, without compromising performance! The “technology” that our DNA filter uses to clean the air is surprisingly common to all of us. It is part of our body; we use it constantly to stay alive! It is part of the Human respiratory system that filters the air we inhale! Tiny moistened hairs called cilia protect the nasal passageways and other parts of the respiratory tract, filtering out dust and other particles that enter the nose with the breathed air. The DNA filtering cotton media is exactly that, millions of tiny fibers that are oiled! The “hairy hybrid” as we call it, is a genius combination of cotton fibers per square millimeter. The Tex & Thread, of this unique cotton, is a result of intensive research, by DNA’s development engineers. The “hairy hybrid” impregnated with DNA’s special filter oil, is transformed into the remarkable DNA media that provides very high filtering efficiency and extremely high flow rates. Trap “enemies” by static charge! We designed the DNA Filter to acquire a positive static charge as the air passes through the pleated and oiled filter media. The weak static charge will very efficiently “pull” on the oiled cotton fibers, the debris and dust that are in the air; remember in science class at school, the pen rubbed against wool that can attract small bits of paper, experiment? This is exactly what happens, as the air flows through the filter, debris even as small as 5 microns will change course and stick onto the fibers, regardless if the “holes” between the fibers can be as large as 150 microns! The first layer of debris on the fibers will then absorb some oil, get statically charged and become part of the filtering media! And guess what, it will start attracting new debris assisting the cotton media in its filtration chore! Finally debris will continue building up on the surface of the filter, as air passes through, until it is totally covered (see photos below). Our filters have being successfully tested even in the harshest environments during the DAKAR Rally! Through Argentina up to the Andes, and down to the Atacama Desert in Chile. The dreadful “Fesh-Fesh” (Guadal) fine powder desert sand of the Atacama Desert, was succesfully kept out of the race engines, outperforming the foam filters! So the myth is busted, the DNA filters can successfully be used in any environment, on and off the road, in the desert or the outback, DNA will be there to protect you. Here comes increased torque & power. The DNA filter will also smoothen out the air flow stream, as it passes through the filter, reducing turbulence and sending smooth clean & fresh air towards the engine intake, increasing torque and power. Additionally to the high air flow, smooth and unified air flow is very important. This explains why we see a decrease in the power output when testing a bike or car on the dyno “without” a filter as the circulation of the air in the air box is disturbed and the result is turbulence and low power output. FAQs About DNA Air Filters. Does the DNA filter provide the same level of protection as the OEM filter? What is filtering efficiency? What is ISO 5011 filtering efficiency test? How does DNA measure the airflow and why is this data useful for me, the end user? Other performance filters manufacturers, claim air flow data much higher than DNA for the same model, is it possible? I also tried to find the stock OEM filter flow data from them to compare. Can i use the DNA Data? Can I change my OEM filter with a DNA without changing fueling? I have heard that only the foam filters are good for Off-Road use not the cotton ones. Can I use the DNA filter for Off-Road use? Can I use the DNA filter un-oiled? Must I always apply oil after cleaning it? I have seen, in many other cotton filters, the rubber material the filter is made of, has leaked all over the filtering media severely reducing the filtering area. Can this happen to the DNA filters? I have a race bike. Do I need to use a filter and if yes why DNA? What is DNA FCd design? How often do I have to clean my DNA filter? Can I use gasoline, thinners or compressed air to clean my DNA filter? Yes and even better, the DNA filters have a filtering efficiency of minimum 98% (ISO 5011 test). Good quality OEM paper filters are from 97% to 99% and the foam filters are from 92% to 97%. For example, the DNA Filter for every 100 grams of dirt that it will receive, it will “trap” 98-99 grams, and this applies even to fine dirt as small as 5 microns. The percentage of dust that the filter retains during a laboratory test, following the ISO 5011 protocol. DNA uses the most advanced computerized ROTRONICS flowbench available today. The complete procedure is computer controlled/automated, to avoid human error. Additionally, wa always test the DNA filters back to back, the same day and time, with the stock OEM filters and publish the results. Reading our data, you can immediately see the differences in air flow, between the 2 filters and what to expect by using the DNA filters. Well guess what, the data claimed were false, nothing to do with the reality! Of course the flow was higher than the stock but much lower compared to the DNA! No wonder they never compare it with the stock, as they can’t claim 300%! Increase in air flow over the stock OEM filter. Only data measured back to back the same time are comparable, don’t forget we are measuring air! This is why we always publish the stock OEM data. In cases the air flow of the DNA Filter is extremely high we include with the filter special instructions. DNA has developed a unique filtering media that is perfect for off-road use. During the toughest rally in the world, DAKAR 2011 in Argentina – Chile, one of the factory Aprilia 450 Rally bikes, was racing with DNA filter. The results were very impressive compared to the rest of the team’s bikes racing with foam filters. Every evening when the bikes were serviced, compared back to back the DNA filter and the foam filters, absolutely no dust had passed through and the engine was like new! Not to mention that one filter was enough for each day, compared to 2 or 3 foam filters per day the other bikes had to use. So this myth is busted! No, you must never use the DNA filter un-oiled. The oil is a crucial part of the filtering media. You must always apply the Special DNA filter oil, not just any oil, after servicing the filter. Absolutely no, DNA uses very special thixotropic polyurethane that will not leak in the filtering media reducing the active filtering area, when we produce our round filters. Concerning the panel filters, we will allow a controlled 3 to 5 mm leak, that is nothing compared to the uneven 10 to 15 mm leak that our competitors have. Race bikes must be kept always in top condition, especially the engine. Debris and flying bugs found at the track, plus rubber from the bikes’ tires in front, can seriously damage the engine. DNA will provide the maximum air flow and at the same time maximum protection. We do not compromise filtering efficiency in order to increase flow; we increase air flow using our revolutionary FCd design, maintaining the 4 layer reliable DNA filtering media. If you want the highest air flow and filtering efficiency of 98% for your race engine, then your only choice is DNA. The DNA FCd design is an innovation by DNA. It allows the pleated filtering media to follow precisely the air box contour, regardless the complexity of the shape. Using the complete footprint of the air box, we eliminate “dead spots” that rob power and at the same time seriously increase air flow. Using DNA FCd technology, at least 20% and up to 80% more filtration area is common! The servicing intervals depend on the environment that the vehicle is used. Once a year or every 15.000 to 30.000 km is suggested, to keep your DNA filter in top condition. An easy way to check if the filter needs cleaning, is to see if the wire mesh that that is on the dirty side, is visible. If you can see the mesh, you can continue using the filter. If the mesh is totally covered in debris, you must clean the filter. You must treat your DNA filter as delicate textile. How woulld you clean an expensive and delicate garment? First of all read the cleaning instructions, then follow them carefully. Every DNA filter packaging & the DNA service products include detailed cleaning instructions. The procedure is very user friendly. If we anticipate a longer lead time, it will be noted in the item description. For customers that need their parts urgently we offer UPS and DHL Courier Service. UPS and DHL are using their global network to deliver on time for your needs the products ordered. This service is optional and it comes with an extra charge. Please note that, in this case, you will be accepting responsibility if anything were to happen to the package. Required by your country for importing consumer goods. In the event of a defect, these are your exclusive remedies. Such benefits may include additional warranties or rights relating to the performance of this product and remedies applicable in the event of a defect. Sole and Exclusive Remedy. RETURN OF NON-DEFECTIVE PRODUCTS. Thus, we offer the option to our customers to return even non defective products. Specifically, the item should not have been unpacked (apart from trying it of course), scratched, broken or painted. Also the item must have its original box. The return of a non-defective product can only be done once. This credit balance can be used in any new order for the customer wishes. In case you want to cancel your order, please keep in mind that the cancellation will be accepted within 2 hour of the order completion. Beyond that point no cancellation will be accepted. Once we receive and inspect the product, we will credit your account. Please allow 5-7 days for a credit to appear on your account. There is nothing to worry about. 9:00-23:00 (GMT+2). 12 Gateway mews – N11 2UT – London – United Kingdom. TPL IKE, is a Greek Company based in Patras established by a team of engineers whose sole goal was bringing high-quality shopping experience to any enthusiast who visits us online. Our team comprises of talented and committed engineers with wide technological expertise and experience in the motorsports industry. We hope our friendly and fair customer approach differentiates us from the competition out there. For us, the customer always comes first and we always do our best to make sure that each customer has an experience which is exemplary of our brand. Our principles of offering top products, quality, service and rapid availability kept us going all these years. Ethnomartyron 40 – 26 333 – Patras – Greece.

]]> https://motoairfilter.com/2026/06/dna-air-filter-compatible-for-aprilia-sr-gt-400-25-26-pn-p-pg4sc21-01/feed/ 0 https://motoairfilter.com/2026/06/aftermarket-fuel-pump-unit-to-fit-honda-vision-nsc110-2021-2022-2023/ https://motoairfilter.com/2026/06/aftermarket-fuel-pump-unit-to-fit-honda-vision-nsc110-2021-2022-2023/#comments Thu, 25 Jun 2026 07:10:33 +0000 https://motoairfilter.com/2026/06/aftermarket-fuel-pump-unit-to-fit-honda-vision-nsc110-2021-2022-2023/







Product : Fuel Pump – MCA129. Country of manufacture : China. TBG The Bike Guys. We are a supplier of quality motorcycle and scooter spare parts specifically designed for small-capacity machines. We aim to increase our product range on a weekly basis. Please order before 2pm Monday to Friday for same-day dispatch; any orders that are made on the weekend or bank holidays will be dispatched the following Monday. Will this fit my bike? Please note that due to the fact we do not open on the weekends, message replies may be slow on Mondays, but do not worry, we have not forgotten about you.

]]> https://motoairfilter.com/2026/06/aftermarket-fuel-pump-unit-to-fit-honda-vision-nsc110-2021-2022-2023/feed/ 0 https://motoairfilter.com/2026/06/kn-motorcycle-high-flow-air-filter-black-red-for-honda-crf-300-l-2021-2025/ https://motoairfilter.com/2026/06/kn-motorcycle-high-flow-air-filter-black-red-for-honda-crf-300-l-2021-2025/#comments Wed, 24 Jun 2026 07:05:38 +0000 https://motoairfilter.com/2026/06/kn-motorcycle-high-flow-air-filter-black-red-for-honda-crf-300-l-2021-2025/


Designed to provide increased performance. Pleated media provides a large filtration area offering long service intervals. Multi-layers of woven cotton gauze media offers excellent filtration. Fits directly into OEM air box with application specific sealing bead ensuring a precise fit. Fuel-management modifications are not required for increased performance. Washable & reusable, pre-oiled and ready to ride. Made in the USA for over 50 years. This item fits to following bikes. We will accept your request at our earliest opportunity. This includes Republic Of Ireland. Please do not ask us to lower the value of goods this is illegal and we do not want to get involved in this kind of activity.

]]> https://motoairfilter.com/2026/06/kn-motorcycle-high-flow-air-filter-black-red-for-honda-crf-300-l-2021-2025/feed/ 0 https://motoairfilter.com/2026/06/kn-performance-air-filter-honda-cbf1000f-2010-2022/ https://motoairfilter.com/2026/06/kn-performance-air-filter-honda-cbf1000f-2010-2022/#comments Tue, 23 Jun 2026 07:00:05 +0000 https://motoairfilter.com/2026/06/kn-performance-air-filter-honda-cbf1000f-2010-2022/









Motorcycle and Car Performance Accessories. K&N Performance Air Filter Honda CBF1000F 2010 – 2022. This K&N Air Filter is designed to fit model years Honda CBF1000F 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022. For over 40 years K&N has been designing and manufacturing performance air filters for motorcycles. They provide a high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Designed as a direct replacement for the stock motorcycle air filter element, K&N s washable and reusable pleated media air filter provides a large filtration area for a better throttle response, more horsepower and long service intervals. Fuel management modifications are not normally required for increased performance. Designed to provide increased horsepower and torque. Pleated media provides a large filtration area offering long service intervals. Multiple layers of woven cotton gauze media offers excellent filtration. Application specific base seal and sealing bead. Made in the USA for over 40 years. Washable & reusable, pre-oiled and ready to ride!

]]> https://motoairfilter.com/2026/06/kn-performance-air-filter-honda-cbf1000f-2010-2022/feed/ 0 https://motoairfilter.com/2026/06/original-air-filter-spark-plug-oil-filter-servicekit-for-ktm-950-supermoto-all/ https://motoairfilter.com/2026/06/original-air-filter-spark-plug-oil-filter-servicekit-for-ktm-950-supermoto-all/#comments Mon, 22 Jun 2026 18:55:07 +0000 https://motoairfilter.com/2026/06/original-air-filter-spark-plug-oil-filter-servicekit-for-ktm-950-supermoto-all/


KTM 950 Supermoto All Original Air Filter Spark Plug Oil Filter Servicekit Sm. The description of this item has been automatically translated. Inspection kit consisting of. 4 liter Castrol Power1 Racing 10w50 fully synthetic. 1x Hiflo Premium oil filter. 1x original KTM air filter. 2x NGK spark plug CR8EK Please note the information in the manual! O-ring for oil filter cover. Gasket for oil drain plugs. 1x 500ml brake fluid TRW DOT 5.1. KTM 950 Supermoto, all models. Of course, we would also be happy to create a service kit for you according to your wishes different oil, spark plugs, etc. Many other items are available in the shop or upon request, e. Brake pads, spark plugs, tools for changing the oil. We can also offer many original spare parts. Castrol Power 1 Racing 4T 10w50 Castrol Power 1 Racing 4T 10W-50 is a 4T motorcycle engine oil based on HC synthesis with the new Race Derived TechnologyTM. It offers excellent lubricant film stability and good performance even under high loads and over longer periods of time, such as during racing. Reduced coefficients of friction ensure maximum available power output from the engine. Standards: API SN, JASO MA2 TRW Lucas brake fluid DOT 5.1 DOT 5.1 brake fluid may also be mixed with DOT 4 and filled into systems with DOT 4 marking. The DOT 5.1 brake fluid is particularly suitable for racing or year-round use. Higher reserves when driving through passes and in extreme cold. Fully suitable for all vehicles with ABS. Dry boiling point: 269°C Wet boiling point: 187°C Standards: DOT 3, DOT 4, DOT 5.1. We always make every effort to ensure that packages arrive to you quickly and carefully. Note on waste oil disposal. The return also extends to oil filters and oil-containing waste that occurs regularly when changing the oil. Drop off location is listed in the Contacts address. You can use the used oil or Please personally hand over oil filters and any oily waste that occurs during oil changes to us. 35 years of workshop experience. Specialist shop with workshop. Castrol Power 1 Racing 4T 10W-50 is a 4T motorcycle engine oil based on HC synthesis with the new Race Derived TechnologyTM. Alternatively, you can cho. KTM Castrol Hiflo NGK TRW. NGK CR8EK HF158 HF650 Wartungsset Inpektion. Inspektions Kundendienst Wartungs Kit Set Paket. Inspektion Teile Luftfilter Original KTM. Ölwechselset Ölwechsel Set Power Parts. Castrol Power 1 Racing 4T 10w50 10 w 50. TRW Lucas Bremsflüssigkeit Brake Fluid. DOT 5.1 5 1.

]]> https://motoairfilter.com/2026/06/original-air-filter-spark-plug-oil-filter-servicekit-for-ktm-950-supermoto-all/feed/ 0 https://motoairfilter.com/2026/06/kn-performance-air-filter-aprilia-tuono-v4-1100-factory-2015-2020/ https://motoairfilter.com/2026/06/kn-performance-air-filter-aprilia-tuono-v4-1100-factory-2015-2020/#comments Mon, 22 Jun 2026 06:51:42 +0000 https://motoairfilter.com/2026/06/kn-performance-air-filter-aprilia-tuono-v4-1100-factory-2015-2020/









Motorcycle and Car Performance Accessories. K&N Performance Air Filter Aprilia Tuono V4 1100 Factory 2015 – 2020. This K&N Air Filter is designed to fit model years Aprilia Tuono V4 1100 Factory 2015 2016 2017 2018 2019 2020. For over 40 years K&N has been designing and manufacturing performance air filters for motorcycles. They provide a high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Designed as a direct replacement for the stock motorcycle air filter element, K&N s washable and reusable pleated media air filter provides a large filtration area for a better throttle response, more horsepower and long service intervals. Fuel management modifications are not normally required for increased performance. Designed to provide increased horsepower and torque. Pleated media provides a large filtration area offering long service intervals. Multiple layers of woven cotton gauze media offers excellent filtration. Application specific base seal and sealing bead. Made in the USA for over 40 years. Washable & reusable, pre-oiled and ready to ride! Tuono 1100 V4 Factory.

]]> https://motoairfilter.com/2026/06/kn-performance-air-filter-aprilia-tuono-v4-1100-factory-2015-2020/feed/ 0 https://motoairfilter.com/2026/06/ducati-916-916-senna-ii-1997-bmc-air-filter-fm324-19/ https://motoairfilter.com/2026/06/ducati-916-916-senna-ii-1997-bmc-air-filter-fm324-19/#comments Sun, 21 Jun 2026 18:50:41 +0000 https://motoairfilter.com/2026/06/ducati-916-916-senna-ii-1997-bmc-air-filter-fm324-19/


BMC FM324-19 Air Filter. BMC Replacement Air Filter The know-how gained on the racetracks is directly incorporated into the production of the series filters. To offer the discerning motorcyclist a product that is tried and tested, delivers performance and is in a constant state of evolution. Made from the best materials that are currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made of a special cotton fabric (4 layers) soaked in a low-sticky oil. It is encased in an aluminum mesh treated with an epoxy solution to make it resistant to gasoline fumes and oxidation. Furthermore, cotton has the advantage of being washable and reusable. These features guarantee that BMC sports air filters (replacement air filters) offer a higher airflow compared to the original paper filters, minimal pressure loss of the incoming air, and thus lead to better engine performance. Maximum air permeability (4 layers of cotton) – Higher absorption and filtration – Improved pressure drop ratio – Tested using international testing procedures. 1x BMC Air Filter. Product Type: Air Filter. You can send us a message by using the “Questions and answers” section towards the bottom of the page.

]]> https://motoairfilter.com/2026/06/ducati-916-916-senna-ii-1997-bmc-air-filter-fm324-19/feed/ 0 https://motoairfilter.com/2026/06/kn-performance-air-filter-kawasaki-z650-2017-2025/ https://motoairfilter.com/2026/06/kn-performance-air-filter-kawasaki-z650-2017-2025/#comments Sun, 21 Jun 2026 06:48:43 +0000 https://motoairfilter.com/2026/06/kn-performance-air-filter-kawasaki-z650-2017-2025/









Motorcycle and Car Performance Accessories. K&N Performance Air Filter Kawasaki Z650 2017 – 2025. This K&N Air Filter is designed to fit model years Kawasaki Z650 2017 2018 2019 2020 2021 2022 2023 2024 2025. For over 40 years K&N has been designing and manufacturing performance air filters for motorcycles. They provide a high, virtually unrestricted air flow while maintaining filtration levels critical to ensure long engine life. Designed as a direct replacement for the stock motorcycle air filter element, K&N s washable and reusable pleated media air filter provides a large filtration area for a better throttle response, more horsepower and long service intervals. Fuel management modifications are not normally required for increased performance. Designed to provide increased horsepower and torque. Pleated media provides a large filtration area offering long service intervals. Multiple layers of woven cotton gauze media offers excellent filtration. Application specific base seal and sealing bead. Made in the USA for over 40 years. Washable & reusable, pre-oiled and ready to ride!

]]> https://motoairfilter.com/2026/06/kn-performance-air-filter-kawasaki-z650-2017-2025/feed/ 0 https://motoairfilter.com/2026/06/k-n-motorcycle-universal-clamp-on-air-filter-black-red-rc232/ https://motoairfilter.com/2026/06/k-n-motorcycle-universal-clamp-on-air-filter-black-red-rc232/#comments Sat, 20 Jun 2026 18:46:06 +0000 https://motoairfilter.com/2026/06/k-n-motorcycle-universal-clamp-on-air-filter-black-red-rc232/


Universal Clamp-On Air Filter. Clamps directly to the carburetor throat, replacing the stock airbox and filter element. Match the OD of your carb throat with the ID of the filter. We will accept your request at our earliest opportunity. This includes Republic Of Ireland. Please do not ask us to lower the value of goods this is illegal and we do not want to get involved in this kind of activity.

]]> https://motoairfilter.com/2026/06/k-n-motorcycle-universal-clamp-on-air-filter-black-red-rc232/feed/ 0