Air-Filter-For-2006-KTM-50-SX-Pro-Sr-LC-Offroad-Motorcycle-Twin-Air-154006-01-odk

Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006

Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006
Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006
Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006
Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006

Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006
Coarse open-pore foam catches airborn dirt, grime and sand Fine open-pore inner foam acts as second filter to trap the smallest particles while ensuring maximum air passage Adhesive withstands repeated cleaning Smaller than stock to increase air space and circulation around filter. Please note some of our listings use stock photos which may be slightly different than the actual product. Catalogue Images FOR RAD PART NUMBER: 630460. Your item must be unopened/unused and in the same condition that you received it. It must also be in the original packaging. Any problems with these items need to be reported to RAD POWERSPORTS immediately. If the product is damaged in transit please report damage immediately to us so we can file a claim with the carrier. We also do not accept products that are hazardous materials, or flammable liquids or gases, service manuals or installation videos. If you have questions about fitment please consult us before ordering and we will be happy to do research for you to be sure you are getting the proper fitting product. The responsibility of the user /installer is to verify the fit of all parts prior to installation. Tracking is provided within an hour of your order being boxed. The item “Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006″ is in sale since Thursday, July 11, 2019. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Other Intake & Fuel Systems”. The seller is “rad_powersports” and is located in Lake Luzerne, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Brand: Twin Air
  • MPN: 110087.TwinAir.154006^RAD Part Number

Air Filter For 2006 KTM 50 SX Pro Sr LC Offroad Motorcycle Twin Air 154006
K-N-Intake-System-RK-3943-Harley-Davidson-01-ggkb

K&N Intake System RK-3943 Harley Davidson

K&N Intake System RK-3943 Harley Davidson

K&N Intake System RK-3943 Harley Davidson
K&N Intake System – RK-3943 – Harley Davidson. Over 10 Years Online. Experience is premium in the automotive business, and we have loads of it. Our experts are happy to answer your questions on oil or anything else we stock. Any damages, we replace, no quibbles. GREAT SERVICE & SUPPORT – UK STOCK. The K&N RK-3943 High-Flow Air Intake System increases engine intake airflow and delivering more horsepower & torque to certain Harley-Davidson XL1200 model motorcycles. The intake system increases power by eliminating the stock OE air cleaner and replacing it with a complete High-Flow Air Intake System. The sturdy custom aluminium backing plate mounts directly to the throttle body via an aluminium integrated internal-run breather system. The intake system comes with a K&N Air Filter for high air flow and long service intervals. The K&N High-Flow Air Filter is washable reusable pre-oiled and ready for installation. To help identify which performance intake kit fits your bike – we’re happy to help. Guaranteed increase in horsepower. Replaces the stock air filter and cleaner backing plate assembly. Fits behind the OE air cleaner cover maintaining the factory appearance. Washableoversized K&N high-flow air filter equals longer life. Oversized blackpowder coated aluminium backing plate provides solid mounting. Dyno tuned velocity stack directs airflow to engine. Built in breathers replace external OE breathers. Air Filter Colour: Red. Air Filter Height: 2.25 in (57 mm). Air Filter Material: Cotton Gauze. California Restricted: Not legal for sale or use in California. Product Box Height: 4.88 in (124 mm). Product Box Length: 11.75 in (298 mm). Product Box Width: 9.5 in (241 mm). Product Style: Motorcycle Intake System. Street Legal In All US States: No. TUV Approved (Europe): No. Weight: 3.4 lb (1.6 kg). Fitment / Compatibility Details. 2015 HARLEY DAVIDSON XL883N IRON 54 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2015 HARLEY DAVIDSON XL883L SUPERLOW 54 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2015 HARLEY DAVIDSON XL1200X FORTY-EIGHT 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2015 HARLEY DAVIDSON XL1200V SEVENTY-TWO 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2015 HARLEY DAVIDSON XL1200T SUPERLOW 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2015 HARLEY DAVIDSON XL1200C SPORTSTER CUSTOM 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2014 HARLEY DAVIDSON XL1200X FORTY-EIGHT 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2014 HARLEY DAVIDSON XL1200V SEVENTY-TWO 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2014 HARLEY DAVIDSON XL1200T SUPERLOW 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. 2014 HARLEY DAVIDSON XL1200C SPORTSTER CUSTOM 74 CIStreet Legal In All US States: No – TUV Approved (Europe): No. OPIE OILS was established in 1925 and has been trading on the Internet since 2004. In this time we have become the UK’s largest independent online retailer of quality Oils and Fluids. We sell the most comprehensive range of quality and specialist oils for Cars and Bikes anywhere in Europe. We stock engine oils, gear oils, differential and axle oils, brake fluids, power steering fluids, coolants and workshop products from Castrol, Mobil, Shell, Fuchs, Silkolene, Motul, Millers Oils, Millers Classic Oils and Red Line. How long will it take to get my order? The majority of items are held in stock and dispatched from our UK warehouse. Monday to Friday inclusive, unless we contact you to advise otherwise. We may list products which are not held as stock and are special order items. Where can my order be delivered to? We regret that our couriers are not able to deliver to PO boxes, university campuses and military bases. How will I know when my order will arrive? We send hundreds of parcels every week. We know how to pack your parcel so that it reaches you safely. We use high quality, custom made boxes to enable us to pack orders sensibly, offering optimum protection against courier damage. If – despite our best efforts – any order is damaged, we’ll replace it without question! We always want you to be satisfied with your order and pride ourselves on our customer service. Our cancellation policy does not affect your rights when we are at fault, e. If goods are faulty or mis-described. If you cancel, you must return the goods to us at your own expense. If a fault is found later on or if you delay in making a complaint you will still be entitled to a replacement. We cannot accept responsibility for additional charges or consequential loss incurred if a product does not fit or does not give the desired results. Our liability is limited to the price paid for the goods only. In the unlikely event we have sent incorrect goods i. Not what you ordered as shown on your order confirmation. When the goods supplied do not fit your vehicle and we provided incorrect guidance to you as to which product/s were suitable. We ask that you return the goods in the original packaging, clean and resaleable. In any circumstance within 30 days of you receiving the goods. In the unlikely event that you are not 100% satisfied then please give us the opportunity to resolve any issues you may have before leaving feedback. To give you an idea, the weight of oil works out around 1 kg per Litre, that’s roughly 10 times the weight of a CD 5 litres = 50 CDs! This is to ensure our prices remain as competitive as possible. How long will it take for my order to arrive? The vast majority of items are held in stock and dispatched from our UK warehouse. Which Courier do you use? Please ensure someone is present to sign for the item. How can I return items that I have ordered in error? How do I get my Tracking No? To where can my order be delivered? Why is one synthetic oil so much more expensive than another? There are three types of synthetic oils; Hydrocracked, Polyalphaolefin (PAO) and Ester oils. All cheaper oils and the’synthetic’ component of part-synthetic or semi-synthetic oils are hydrocracked mineral oils. PAO synthetics are genuine, lab-made synthetic oils that are better lubricants than hydrocracked oils as they are built for their specific use, rather than the hydrocracked oils that are modified to perform a purpose. Ester based oils are the top end of oil technology and give the best protection available. The ester content (usually ester oils are mixed with PAO oils) has several functions that are very useful. Esters are electrostatically charged so they stick to metal surfaces, meaning that when the vehicle is started, there is already a layer of oil present. They are also more stable at higher temperatures, making them ideal as performance lubricants. The ester content also helps to make those oils better lubricants in general. Is it okay to mix oils? Mixing oil brands, types (synthetic, semi-synthetic and mineral) and viscosities is fine. There are a few exceptions;castor and plant based (as used in some biodegradable oils) are not safe to mix with conventional oils. The only problem with mixing oils is that the quality of the better oil is diluted by the lesser one. Do I need a diesel or petrol oil for my car? In the case of cars with diesel particulate filters (DPFs/FAPs), they will often need an oil that meets an ACEA C specification, which relates to low ash oils. The ACEA specification of an oil is always written on the bottle so long as it meets the spec! The use of oils that do not meet the correct ACEA C specification can result in the particulate filter becoming blocked, an expensive repair. Other than that, there isn’t really such a thing as a diesel engine oil as the vast majority of oils are suitable for both petrol and diesel engines, regardless of how they are marketed. If you look at the specifications listed on an oil, there is usually an ACEA A and an ACEA B specification. The A refers to petrol engine specifications and B to diesel. You will see that the numbers next to the letters are either the same or very close, meaning that the oil is suitable for both types of engine. How often should I change my oil? The life of the oil is dependent on many factors. Full synthetic oils last longer than semi-synthetics or mineral oils, so although they may cost more in the first place, a full synthetic can work out as a cheaper option in the long run. Many cars specify the use of full synthetic long-life oils and these may last over 20000 miles or up to 24 months. If the car is used on track, the oil is subjected to far harsher conditions than motorway use. That may mean that a good track oil will have broken down sufficiently to need changing after 10 hours of use, whereas the same oil would be good for over 100 hours of use on motorways. Short journeys are very hard on the oil as it does not get the chance to get warm and flow properly as well as acceleration and deceleration making the engine work harder. Motorway use is the easiest condition for oil, the speeds are fairly consistent and rarely push the engine hard, there is plenty of air flow to help cool the engine and the oil has a chance to get up to temperature and flow properly. Certain engines suffer from fuel dilution (fuel mixing with the oil) and that is one of the quickest ways that an oil can breakdown. Should I use an oil additive? Good quality engine oils already contain a complex additive pack including detergents and dispersants, anti-wear, anti-corrosion and anti-foaming additives. The only additives we sometimes advise using are the limited slip differential friction modifiers, for certain differentials, and engine oil additives to assist in the process of breaking in a new engine. My engine burns oil – should I use a thicker one? It depends on the engine, what sort of use it gets, how much oil is being used and type of oil being used. Certain engines really prefer a specific grade of oil to operate optimally, others aren’t so fussy. It’s best to ask us if you aren’t sure if your car can use a range of different viscosity oils. Most car manufacturers consider it acceptable for an engine to burn a litre of oil every 1000 miles or in some cases, 1000km. While topping up the oil at that frequency may be annoying and possibly expensive, there is generally nothing to worry about. Using a full synthetic oil may help to reduce oil consumption if a mineral or semi-synthetic oil is being used. Mineral based oils consist of a mix of different sized molecules and the smaller ones can evaporate and then burn relatively easily, increasing the rate of oil consumption. The molecules in synthetic oils are uniform, so they are less likely to evaporate and burn. My car is only being used on the road – do I need a full synthetic oil? It depends on the car. If a car requires a 0w-x grade of oil, then it must be a genuine synthetic oil as it is impossible to make an 0w viscosity oil from mineral oils. Even in cars that do not need oil that meet the above criteria, most of the time a synthetic oil is a preferable option as they give better protection and last longer. This is very relevant in engines used on track. Will using a certain oil help my engine to make more power? When a top quality oil of the correct viscosity is used, a vehicle may actually have a higher power output at the wheels than with other oils. The’gain’ in power is actually a reduction of the power lost in the engine. Internal resistance due to pumping losses and viscous drag and friction is where power is lost and minimising those will lead to more efficient running. Using a good oil reduces the friction as well as increases the protection. A common approach to lubricating a powerful engine is to use as thick an oil as is available, but that adds to the internal resistance as the engine has to work harder to move the oil. That can also lead to increased wear in the engine as the oil does not flow as well as the engine would like. Often an increase in the quality of the oil used rather than the viscosity will be sufficient for many modified cars and that will actually give better protection as well as a slightly increased power output. What colour is oil? Automotive oils are naturally clear, not the amber colour that people assume they are. The reason they are often amber coloured is due to a dye manufacturers add and is only added as people assume oils should be a certain colour. There are many oils on the market that differ from the’norm’ and this is simply due to the addition of different coloured dyes. The dyes have no actual benefit to the oil, other than making it stand out as different to the rest. Why does my oil turn black? As well as lubricating an engine, another important feature of oil is that it cleans, removing combustion by-products from the engine and keeping them in suspension in the oil. This prevents the by-products from settling and building up as deposits in the engine. Should I use an oil flush? In the vast majority of cases, there is no need to flush the engine and flushing can be harmful. What can happen is the flush can loosen harmless deposits in the engine, but then not remove them. Your new oil goes in and after it gets warm and is flowing nicely, the bits which are loosened come off into the oil, so you end up with hard bits floating around in your oil – the last thing you want! If you really want to flush the oil system, the best thing you can do is drain out the oil that is in there, put in some basic mineral oil and run the car for a short while so the oil gets nice and warm. After running it, drain out the mineral oil and put in the correct oil. What oil should I use to run in an engine? A basic mineral oil should be used for running in as friction between the piston rings and cylinder linings is needed to allow the engine to bed in properly. If a synthetic oil is used, it prevents sufficient friction being generated and can lead to the bores becoming glazed. That causes a loss of power and increased oil consumption. We also sell specialist running in oil and trouble-shooting products to assist with running-in. My garage recommends a brand of oil in my car, you recommend something different. So is our recommendation safe to use? The item “K&N Intake System RK-3943 Harley Davidson” is in sale since Tuesday, November 21, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Air Intake & Fuel Delivery\Air Filters”. The seller is “opieoils” and is located in Redruth, Cornwall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.
  • Vehicle Type: Motorcycle
  • Air Filter Type: Fitted Air Filter
  • Brand: K&N Filters
  • Part Manufacturer: K&N Filters
  • Manufacturer Part Number: RK-3943
  • MPN: RK-3943
  • Part Manufacturer Number: RK-3943
  • Unit Quantity: 1.00
  • Unit Type: Unit
  • EAN: 024844362667

K&N Intake System RK-3943 Harley Davidson
K-N-Intake-System-Harley-Davidson-RK-3901-Genuine-Part-01-zrad

K&N Intake System Harley Davidson RK-3901 Genuine Part

K&N Intake System Harley Davidson RK-3901 Genuine Part

K&N Intake System Harley Davidson RK-3901 Genuine Part
K&N Intake System – Harley Davidson – RK-3901 – Genuine Part. Over 10 Years Online. Experience is premium in the automotive business, and we have loads of it. Our experts are happy to answer your questions on oil or anything else we stock. Any damages, we replace, no quibbles. GREAT SERVICE & SUPPORT – UK STOCK. K&N air cleaner assemblies designed for your Harley-Davidson®are a remarkable combination of performance and style. They are machined from billet aluminium lustre polished then chrome plated to complement your show bike. These K&N custom air cleaners fit all touring models. To help identify which performance intake kit fits your bike – we’re happy to help. Designed to increase horsepower & torque. Air Filter Colour: Red. Air Filter Height: 2.25 in (57 mm). Air Filter Inside Diameter: 6.125 in (156 mm). Air Filter Material: Cotton Gauze. Air Filter Outlet Shape: Not Flanged. Air Filter Shape: Round. California Restricted: Not legal for sale or use in California. Clamp Material: No Clamps Required. Clamp Style: No Clamps Required. Filter Material: Cotton Gauze. Inlet Diameter: 2.4 in (61 mm). Mounting Hardware Included: Yes. Neck Flange: 2.4 in (61 mm). Overall Height: 2.5 in (64 mm). Product Box Height: 4.5 in (114 mm). Product Box Length: 11.56 in (294 mm). Product Box Width: 9.5 in (241 mm). Product Style: Motorcycle Intake System. Street Legal In All US States: No. TUV Approved (Europe): No. Weight: 4.7 lb (2.1 kg). Fitment / Compatibility Details. 1997 HARLEY DAVIDSON FXSTSB BAD BOY 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FXSTS SPRINGER SOFTAIL 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FXSTC SOFTAIL CUSTOM 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FXDWG DYNA WIDE GLIDE 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FXDS DYNA CONVERTIBLE 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FXDL DYNA LOW RIDER 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FXD DYNA SUPER GLIDE 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLSTS HERITAGE SPRINGER 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLSTF FAT BOY 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLHTCU ELECTRA GLIDE ULTRA CLASSIC 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLHT ELECTRA GLIDE STANDARD 82 CI – Round Mirrored. 1997 HARLEY DAVIDSON FLHR ROAD KING 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXSTSB BAD BOY 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXSTS SPRINGER SOFTAIL 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXSTC SOFTAIL CUSTOM 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXDWG DYNA WIDE GLIDE 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXDS DYNA CONVERTIBLE 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXDL DYNA LOW RIDER 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FXD DYNA SUPER GLIDE 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLSTN HERITAGE SOFTAIL SPECIAL 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLSTF FAT BOY 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLHTCUI ELECTRA GLIDE ULTRA CLASSIC F/I 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLHTCU ELECTRA GLIDE ULTRA CLASSIC 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLHT ELECTRA GLIDE STANDARD 82 CI – Round Mirrored. 1996 HARLEY DAVIDSON FLHR ROAD KING 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXSTSB BAD BOY 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXSTS SPRINGER SOFTAIL 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXSTC SOFTAIL CUSTOM 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXDWG DYNA WIDE GLIDE 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXDS DYNA LOW RIDER CONV. 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXDL DYNA LOW RIDER 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FXD DYNA SUPER GLIDE 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLTCU ULTRA TOUR GLIDE CLASSIC 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLSTN HERITAGE SOFTAIL SPECIAL 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLSTF FAT BOY 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLHTCU ELECTRA GLIDE ULTRA CLASSIC 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLHTC ELECTRA GLIDE CLASSIC 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLHT ELECTRA GLIDE STANDARD 82 CI – Round Mirrored. 1995 HARLEY DAVIDSON FLHR ROAD KING 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FXSTS SPRINGER SOFTAIL 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FXSTC SOFTAIL CUSTOM 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FXR SUPER GLIDE 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FXLR LOW RIDER CUSTOM 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FXDWG DYNA WIDE GLIDE 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FXDS DYNA LOW RIDER CONV. 1994 HARLEY DAVIDSON FXDL DYNA LOW RIDER 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FLTCU ULTRA TOUR GLIDE CLASSIC 82 CI – Round Mirrored. 1994 HARLEY DAVIDSON FLSTN HERITAGE SOFTAIL SPECIAL 82 CI – R. OPIE OILS was established in 1925 and has been trading on the Internet since 2004. In this time we have become the UK’s largest independent online retailer of quality Oils and Fluids. We sell the most comprehensive range of quality and specialist oils for Cars and Bikes anywhere in Europe. We stock engine oils, gear oils, differential and axle oils, brake fluids, power steering fluids, coolants and workshop products from Castrol, Mobil, Shell, Fuchs, Silkolene, Motul, Millers Oils, Millers Classic Oils and Red Line. How long will it take to get my order? The majority of items are held in stock and dispatched from our UK warehouse. Monday to Friday inclusive, unless we contact you to advise otherwise. We may list products which are not held as stock and are special order items. Where can my order be delivered to? We regret that our couriers are not able to deliver to PO boxes, university campuses and military bases. How will I know when my order will arrive? We send hundreds of parcels every week. We know how to pack your parcel so that it reaches you safely. We use high quality, custom made boxes to enable us to pack orders sensibly, offering optimum protection against courier damage. If – despite our best efforts – any order is damaged, we’ll replace it without question! We always want you to be satisfied with your order and pride ourselves on our customer service. Our cancellation policy does not affect your rights when we are at fault, e. If goods are faulty or mis-described. If you cancel, you must return the goods to us at your own expense. If a fault is found later on or if you delay in making a complaint you will still be entitled to a replacement. We cannot accept responsibility for additional charges or consequential loss incurred if a product does not fit or does not give the desired results. Our liability is limited to the price paid for the goods only. In the unlikely event we have sent incorrect goods i. Not what you ordered as shown on your order confirmation. When the goods supplied do not fit your vehicle and we provided incorrect guidance to you as to which product/s were suitable. We ask that you return the goods in the original packaging, clean and resaleable. In any circumstance within 30 days of you receiving the goods. In the unlikely event that you are not 100% satisfied then please give us the opportunity to resolve any issues you may have before leaving feedback. To give you an idea, the weight of oil works out around 1 kg per Litre, that’s roughly 10 times the weight of a CD 5 litres = 50 CDs! This is to ensure our prices remain as competitive as possible. How long will it take for my order to arrive? The vast majority of items are held in stock and dispatched from our UK warehouse. Which Courier do you use? Please ensure someone is present to sign for the item. How can I return items that I have ordered in error? How do I get my Tracking No? To where can my order be delivered? Why is one synthetic oil so much more expensive than another? There are three types of synthetic oils; Hydrocracked, Polyalphaolefin (PAO) and Ester oils. All cheaper oils and the’synthetic’ component of part-synthetic or semi-synthetic oils are hydrocracked mineral oils. PAO synthetics are genuine, lab-made synthetic oils that are better lubricants than hydrocracked oils as they are built for their specific use, rather than the hydrocracked oils that are modified to perform a purpose. Ester based oils are the top end of oil technology and give the best protection available. The ester content (usually ester oils are mixed with PAO oils) has several functions that are very useful. Esters are electrostatically charged so they stick to metal surfaces, meaning that when the vehicle is started, there is already a layer of oil present. They are also more stable at higher temperatures, making them ideal as performance lubricants. The ester content also helps to make those oils better lubricants in general. Is it okay to mix oils? Mixing oil brands, types (synthetic, semi-synthetic and mineral) and viscosities is fine. There are a few exceptions;castor and plant based (as used in some biodegradable oils) are not safe to mix with conventional oils. The only problem with mixing oils is that the quality of the better oil is diluted by the lesser one. Do I need a diesel or petrol oil for my car? In the case of cars with diesel particulate filters (DPFs/FAPs), they will often need an oil that meets an ACEA C specification, which relates to low ash oils. The ACEA specification of an oil is always written on the bottle so long as it meets the spec! The use of oils that do not meet the correct ACEA C specification can result in the particulate filter becoming blocked, an expensive repair. Other than that, there isn’t really such a thing as a diesel engine oil as the vast majority of oils are suitable for both petrol and diesel engines, regardless of how they are marketed. If you look at the specifications listed on an oil, there is usually an ACEA A and an ACEA B specification. The A refers to petrol engine specifications and B to diesel. You will see that the numbers next to the letters are either the same or very close, meaning that the oil is suitable for both types of engine. How often should I change my oil? The life of the oil is dependent on many factors. Full synthetic oils last longer than semi-synthetics or mineral oils, so although they may cost more in the first place, a full synthetic can work out as a cheaper option in the long run. Many cars specify the use of full synthetic long-life oils and these may last over 20000 miles or up to 24 months. If the car is used on track, the oil is subjected to far harsher conditions than motorway use. That may mean that a good track oil will have broken down sufficiently to need changing after 10 hours of use, whereas the same oil would be good for over 100 hours of use on motorways. Short journeys are very hard on the oil as it does not get the chance to get warm and flow properly as well as acceleration and deceleration making the engine work harder. Motorway use is the easiest condition for oil, the speeds are fairly consistent and rarely push the engine hard, there is plenty of air flow to help cool the engine and the oil has a chance to get up to temperature and flow properly. Certain engines suffer from fuel dilution (fuel mixing with the oil) and that is one of the quickest ways that an oil can breakdown. Should I use an oil additive? Good quality engine oils already contain a complex additive pack including detergents and dispersants, anti-wear, anti-corrosion and anti-foaming additives. The only additives we sometimes advise using are the limited slip differential friction modifiers, for certain differentials, and engine oil additives to assist in the process of breaking in a new engine. My engine burns oil – should I use a thicker one? It depends on the engine, what sort of use it gets, how much oil is being used and type of oil being used. Certain engines really prefer a specific grade of oil to operate optimally, others aren’t so fussy. It’s best to ask us if you aren’t sure if your car can use a range of different viscosity oils. Most car manufacturers consider it acceptable for an engine to burn a litre of oil every 1000 miles or in some cases, 1000km. While topping up the oil at that frequency may be annoying and possibly expensive, there is generally nothing to worry about. Using a full synthetic oil may help to reduce oil consumption if a mineral or semi-synthetic oil is being used. Mineral based oils consist of a mix of different sized molecules and the smaller ones can evaporate and then burn relatively easily, increasing the rate of oil consumption. The molecules in synthetic oils are uniform, so they are less likely to evaporate and burn. My car is only being used on the road – do I need a full synthetic oil? It depends on the car. If a car requires a 0w-x grade of oil, then it must be a genuine synthetic oil as it is impossible to make an 0w viscosity oil from mineral oils. Even in cars that do not need oil that meet the above criteria, most of the time a synthetic oil is a preferable option as they give better protection and last longer. This is very relevant in engines used on track. Will using a certain oil help my engine to make more power? When a top quality oil of the correct viscosity is used, a vehicle may actually have a higher power output at the wheels than with other oils. The’gain’ in power is actually a reduction of the power lost in the engine. Internal resistance due to pumping losses and viscous drag and friction is where power is lost and minimising those will lead to more efficient running. Using a good oil reduces the friction as well as increases the protection. A common approach to lubricating a powerful engine is to use as thick an oil as is available, but that adds to the internal resistance as the engine has to work harder to move the oil. That can also lead to increased wear in the engine as the oil does not flow as well as the engine would like. Often an increase in the quality of the oil used rather than the viscosity will be sufficient for many modified cars and that will actually give better protection as well as a slightly increased power output. What colour is oil? Automotive oils are naturally clear, not the amber colour that people assume they are. The reason they are often amber coloured is due to a dye manufacturers add and is only added as people assume oils should be a certain colour. There are many oils on the market that differ from the’norm’ and this is simply due to the addition of different coloured dyes. The dyes have no actual benefit to the oil, other than making it stand out as different to the rest. Why does my oil turn black? As well as lubricating an engine, another important feature of oil is that it cleans, removing combustion by-products from the engine and keeping them in suspension in the oil. This prevents the by-products from settling and building up as deposits in the engine. Should I use an oil flush? In the vast majority of cases, there is no need to flush the engine and flushing can be harmful. What can happen is the flush can loosen harmless deposits in the engine, but then not remove them. Your new oil goes in and after it gets warm and is flowing nicely, the bits which are loosened come off into the oil, so you end up with hard bits floating around in your oil – the last thing you want! If you really want to flush the oil system, the best thing you can do is drain out the oil that is in there, put in some basic mineral oil and run the car for a short while so the oil gets nice and warm. After running it, drain out the mineral oil and put in the correct oil. What oil should I use to run in an engine? A basic mineral oil should be used for running in as friction between the piston rings and cylinder linings is needed to allow the engine to bed in properly. If a synthetic oil is used, it prevents sufficient friction being generated and can lead to the bores becoming glazed. That causes a loss of power and increased oil consumption. We also sell specialist running in oil and trouble-shooting products to assist with running-in. My garage recommends a brand of oil in my car, you recommend something different. So is our recommendation safe to use? The item “K&N Intake System Harley Davidson RK-3901 Genuine Part” is in sale since Thursday, October 1, 2015. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Air Filters”. The seller is “opieoils” and is located in Redruth, Cornwall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay, Viet nam.
  • Vehicle Type: Motorcycle
  • Air Filter Type: Fitted Air Filter
  • Brand: K&N Filters
  • Part Manufacturer: K&N Filters
  • Manufacturer Part Number: RK-3901
  • MPN: RK-3901
  • Part Manufacturer Number: RK-3901
  • Unit Quantity: 1.00
  • Unit Type: Unit
  • EAN: 024844038807

K&N Intake System Harley Davidson RK-3901 Genuine Part
K-N-Intake-System-Kawasaki-RK-3918-Genuine-Part-01-gft

K&N Intake System Kawasaki RK-3918 Genuine Part

K&N Intake System Kawasaki RK-3918 Genuine Part

K&N Intake System Kawasaki RK-3918 Genuine Part
K&N Intake System – Kawasaki – RK-3918 – Genuine Part. Over 10 Years Online. Experience is premium in the automotive business, and we have loads of it. Our experts are happy to answer your questions on oil or anything else we stock. Any damages, we replace, no quibbles. GREAT SERVICE & SUPPORT – UK STOCK. K&N’s Metric Cruiser Complete Intake Assemblies are designed to provide increased horsepower and performance. Machined from billet aluminiumeach air cleaner is lustre polished then chrome plated to compliment any show bike. To help identify which performance intake kit fits your bike – we’re happy to help. Designed to increase horsepower & torque. Air Filter Colour: Red. Air Filter Height: 3 in (76 mm). Air Filter Inside Diameter: 7.469 in (190 mm). Air Filter Material: Cotton Gauze. Air Filter Outlet Shape: Not Flanged. Air Filter Shape: Triangle. Clamp Material: No Clamps Required. Clamp Style: No Clamps Required. Filter Material: Cotton Gauze. Inlet Diameter: 2.25 in (57 mm). Mounting Hardware Included: Yes. Neck Flange: 2.25 in (57 mm). Overall Height: 2.75 in (70 mm). Product Box Height: 4.5 in (114 mm). Product Box Length: 11.56 in (294 mm). Product Box Width: 9.5 in (241 mm). Product Style: Motorcycle Intake System. Street Legal In All US States: Yes. Total Height: 2.75 in (70 mm). TUV Approved (Europe): No. Weight: 4.2 lb (1.9 kg). Fitment / Compatibility Details. 2007 KAWASAKI VN2000 VULCAN CLASSIC LT 2000. 2007 KAWASAKI VN2000 VULCAN CLASSIC 2000. 2007 KAWASAKI VN2000 VULCAN 2000. 2006 KAWASAKI VN2000 VULCAN LIMITED 2000. 2006 KAWASAKI VN2000 VULCAN CLASSIC LT 2000. 2006 KAWASAKI VN2000 VULCAN CLASSIC 2000. 2006 KAWASAKI VN2000 VULCAN 2000. 2005 KAWASAKI VN2000 VULCAN 2000. 2004 KAWASAKI VN2000 VULCAN 2000. OPIE OILS was established in 1925 and has been trading on the Internet since 2004. In this time we have become the UK’s largest independent online retailer of quality Oils and Fluids. We sell the most comprehensive range of quality and specialist oils for Cars and Bikes anywhere in Europe. We stock engine oils, gear oils, differential and axle oils, brake fluids, power steering fluids, coolants and workshop products from Castrol, Mobil, Shell, Fuchs, Silkolene, Motul, Millers Oils, Millers Classic Oils and Red Line. How long will it take to get my order? The majority of items are held in stock and dispatched from our UK warehouse. Monday to Friday inclusive, unless we contact you to advise otherwise. We may list products which are not held as stock and are special order items. Where can my order be delivered to? We regret that our couriers are not able to deliver to PO boxes, university campuses and military bases. How will I know when my order will arrive? We send hundreds of parcels every week. We know how to pack your parcel so that it reaches you safely. We use high quality, custom made boxes to enable us to pack orders sensibly, offering optimum protection against courier damage. If – despite our best efforts – any order is damaged, we’ll replace it without question! We always want you to be satisfied with your order and pride ourselves on our customer service. Our cancellation policy does not affect your rights when we are at fault, e. If goods are faulty or mis-described. If you cancel, you must return the goods to us at your own expense. If a fault is found later on or if you delay in making a complaint you will still be entitled to a replacement. We cannot accept responsibility for additional charges or consequential loss incurred if a product does not fit or does not give the desired results. Our liability is limited to the price paid for the goods only. In the unlikely event we have sent incorrect goods i. Not what you ordered as shown on your order confirmation. When the goods supplied do not fit your vehicle and we provided incorrect guidance to you as to which product/s were suitable. We ask that you return the goods in the original packaging, clean and resaleable. In any circumstance within 30 days of you receiving the goods. In the unlikely event that you are not 100% satisfied then please give us the opportunity to resolve any issues you may have before leaving feedback. To give you an idea, the weight of oil works out around 1 kg per Litre, that’s roughly 10 times the weight of a CD 5 litres = 50 CDs! This is to ensure our prices remain as competitive as possible. How long will it take for my order to arrive? The vast majority of items are held in stock and dispatched from our UK warehouse. Which Courier do you use? Please ensure someone is present to sign for the item. How can I return items that I have ordered in error? How do I get my Tracking No? To where can my order be delivered? Why is one synthetic oil so much more expensive than another? There are three types of synthetic oils; Hydrocracked, Polyalphaolefin (PAO) and Ester oils. All cheaper oils and the’synthetic’ component of part-synthetic or semi-synthetic oils are hydrocracked mineral oils. PAO synthetics are genuine, lab-made synthetic oils that are better lubricants than hydrocracked oils as they are built for their specific use, rather than the hydrocracked oils that are modified to perform a purpose. Ester based oils are the top end of oil technology and give the best protection available. The ester content (usually ester oils are mixed with PAO oils) has several functions that are very useful. Esters are electrostatically charged so they stick to metal surfaces, meaning that when the vehicle is started, there is already a layer of oil present. They are also more stable at higher temperatures, making them ideal as performance lubricants. The ester content also helps to make those oils better lubricants in general. Is it okay to mix oils? Mixing oil brands, types (synthetic, semi-synthetic and mineral) and viscosities is fine. There are a few exceptions;castor and plant based (as used in some biodegradable oils) are not safe to mix with conventional oils. The only problem with mixing oils is that the quality of the better oil is diluted by the lesser one. Do I need a diesel or petrol oil for my car? In the case of cars with diesel particulate filters (DPFs/FAPs), they will often need an oil that meets an ACEA C specification, which relates to low ash oils. The ACEA specification of an oil is always written on the bottle so long as it meets the spec! The use of oils that do not meet the correct ACEA C specification can result in the particulate filter becoming blocked, an expensive repair. Other than that, there isn’t really such a thing as a diesel engine oil as the vast majority of oils are suitable for both petrol and diesel engines, regardless of how they are marketed. If you look at the specifications listed on an oil, there is usually an ACEA A and an ACEA B specification. The A refers to petrol engine specifications and B to diesel. You will see that the numbers next to the letters are either the same or very close, meaning that the oil is suitable for both types of engine. How often should I change my oil? The life of the oil is dependent on many factors. Full synthetic oils last longer than semi-synthetics or mineral oils, so although they may cost more in the first place, a full synthetic can work out as a cheaper option in the long run. Many cars specify the use of full synthetic long-life oils and these may last over 20000 miles or up to 24 months. If the car is used on track, the oil is subjected to far harsher conditions than motorway use. That may mean that a good track oil will have broken down sufficiently to need changing after 10 hours of use, whereas the same oil would be good for over 100 hours of use on motorways. Short journeys are very hard on the oil as it does not get the chance to get warm and flow properly as well as acceleration and deceleration making the engine work harder. Motorway use is the easiest condition for oil, the speeds are fairly consistent and rarely push the engine hard, there is plenty of air flow to help cool the engine and the oil has a chance to get up to temperature and flow properly. Certain engines suffer from fuel dilution (fuel mixing with the oil) and that is one of the quickest ways that an oil can breakdown. Should I use an oil additive? Good quality engine oils already contain a complex additive pack including detergents and dispersants, anti-wear, anti-corrosion and anti-foaming additives. The only additives we sometimes advise using are the limited slip differential friction modifiers, for certain differentials, and engine oil additives to assist in the process of breaking in a new engine. My engine burns oil – should I use a thicker one? It depends on the engine, what sort of use it gets, how much oil is being used and type of oil being used. Certain engines really prefer a specific grade of oil to operate optimally, others aren’t so fussy. It’s best to ask us if you aren’t sure if your car can use a range of different viscosity oils. Most car manufacturers consider it acceptable for an engine to burn a litre of oil every 1000 miles or in some cases, 1000km. While topping up the oil at that frequency may be annoying and possibly expensive, there is generally nothing to worry about. Using a full synthetic oil may help to reduce oil consumption if a mineral or semi-synthetic oil is being used. Mineral based oils consist of a mix of different sized molecules and the smaller ones can evaporate and then burn relatively easily, increasing the rate of oil consumption. The molecules in synthetic oils are uniform, so they are less likely to evaporate and burn. My car is only being used on the road – do I need a full synthetic oil? It depends on the car. If a car requires a 0w-x grade of oil, then it must be a genuine synthetic oil as it is impossible to make an 0w viscosity oil from mineral oils. Even in cars that do not need oil that meet the above criteria, most of the time a synthetic oil is a preferable option as they give better protection and last longer. This is very relevant in engines used on track. Will using a certain oil help my engine to make more power? When a top quality oil of the correct viscosity is used, a vehicle may actually have a higher power output at the wheels than with other oils. The’gain’ in power is actually a reduction of the power lost in the engine. Internal resistance due to pumping losses and viscous drag and friction is where power is lost and minimising those will lead to more efficient running. Using a good oil reduces the friction as well as increases the protection. A common approach to lubricating a powerful engine is to use as thick an oil as is available, but that adds to the internal resistance as the engine has to work harder to move the oil. That can also lead to increased wear in the engine as the oil does not flow as well as the engine would like. Often an increase in the quality of the oil used rather than the viscosity will be sufficient for many modified cars and that will actually give better protection as well as a slightly increased power output. What colour is oil? Automotive oils are naturally clear, not the amber colour that people assume they are. The reason they are often amber coloured is due to a dye manufacturers add and is only added as people assume oils should be a certain colour. There are many oils on the market that differ from the’norm’ and this is simply due to the addition of different coloured dyes. The dyes have no actual benefit to the oil, other than making it stand out as different to the rest. Why does my oil turn black? As well as lubricating an engine, another important feature of oil is that it cleans, removing combustion by-products from the engine and keeping them in suspension in the oil. This prevents the by-products from settling and building up as deposits in the engine. Should I use an oil flush? In the vast majority of cases, there is no need to flush the engine and flushing can be harmful. What can happen is the flush can loosen harmless deposits in the engine, but then not remove them. Your new oil goes in and after it gets warm and is flowing nicely, the bits which are loosened come off into the oil, so you end up with hard bits floating around in your oil – the last thing you want! If you really want to flush the oil system, the best thing you can do is drain out the oil that is in there, put in some basic mineral oil and run the car for a short while so the oil gets nice and warm. After running it, drain out the mineral oil and put in the correct oil. What oil should I use to run in an engine? A basic mineral oil should be used for running in as friction between the piston rings and cylinder linings is needed to allow the engine to bed in properly. If a synthetic oil is used, it prevents sufficient friction being generated and can lead to the bores becoming glazed. That causes a loss of power and increased oil consumption. We also sell specialist running in oil and trouble-shooting products to assist with running-in. My garage recommends a brand of oil in my car, you recommend something different. So is our recommendation safe to use? The item “K&N Intake System Kawasaki RK-3918 Genuine Part” is in sale since Tuesday, November 21, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Air Filters”. The seller is “opieoils” and is located in Redruth, Cornwall. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay, Viet nam.
  • Vehicle Type: Motorcycle
  • Air Filter Type: Fitted Air Filter
  • Brand: K&N Filters
  • Part Manufacturer: K&N Filters
  • Manufacturer Part Number: RK-3918
  • MPN: RK-3918
  • Part Manufacturer Number: RK-3918
  • Unit Quantity: 1.00
  • Unit Type: Unit
  • EAN: 024844122605

K&N Intake System Kawasaki RK-3918 Genuine Part
Cobra-606-0104B-PowrFlo-Air-Intake-Black-Harley-Davidson-Softail-Deluxe-FLD-01-gzd

Cobra 606-0104B PowrFlo Air Intake, Black Harley-Davidson Softail Deluxe FLD

Cobra 606-0104B PowrFlo Air Intake, Black Harley-Davidson Softail Deluxe FLD
Cobra 606-0104B PowrFlo Air Intake, Black Harley-Davidson Softail Deluxe FLD

Cobra 606-0104B PowrFlo Air Intake, Black Harley-Davidson Softail Deluxe FLD
UTV / Side x Side. Unique internal venturi design promotes maximum airflow. High-flow K&N® air filter element ensures the best air intake and maximum protection for your engine. The PowrFlo Intake system consists of an aluminum cover and all the fasteners, seals, backing plate and mounting hardware to make for an easy installation. Formed stainless steel mesh insert in the dual entry ports keeps out bugs and debris. Product Name : Air Intake. Material : Aluminum / Stainless Mesh. California Residents WARNING Cancer and Reproductive Harm. If you require a particular service be used, please contact customer service before placing your order. All items must be in original packaging. Electrical items where the box has been opened and or the part has been installed. Used merchandise of any sort. Please make sure the items are in the same condition you received them in. If you install the parts or ride in the gear at all, it is used and cannot be resold as New. All descriptions given by Adrenaline Junkee as to function are for reference only and are not a guarantee. Adrenaline Junkee shall not, under any circumstances, be liable for any special, incidental or consequential damages, including but not limited to damage or loss of goods or claims of customers of the purchaser which may arise and or result from the sale, installation or use of these products. By purchasing or installing the product, the purchaser agrees to all of these terms. We sell an extensive variety of UTV, ATV, motorcycle, PWC, and snowmobile parts and accessories. Why Shop With Us. Join Our Mailing List. Sign up today to receive special insider notifications of deals, promotions, and new items! The item “Cobra 606-0104B PowrFlo Air Intake, Black Harley-Davidson Softail Deluxe FLD” is in sale since Friday, July 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Air Filters”. The seller is “skillzshop” and is located in Chandler, Arizona. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Montserrat.
  • Manufacturer: Cobra
  • Brand: Cobra
  • Manufacturer Part Number: 606-0104B
  • Year: 2018-2019
  • Make: Harley-Davidson
  • Model: Softail Deluxe FLDE,Softail Low Rider FXLR,Softail
  • Part Brand: Cobra
  • Surface Finish: Black
  • Fits: Motorcycle
  • Part Type: PowrFlo Air Intake
  • Compatible Make: Harley-Davidson
  • Compatible Model: Softail Deluxe FLDE,Softail Low Rider FXLR,Softail
  • Color: Black
  • Street/Off-Road: Street
  • Legal Disclaimer: Review your local laws before purchasing
  • Compatibility Disclaimer: Compatibility chart information provided by eBay
  • Photo Disclaimer: For reference only, see item details for product information

Cobra 606-0104B PowrFlo Air Intake, Black Harley-Davidson Softail Deluxe FLD
Galfer-Motorcycle-280mm-Oversized-Tsunami-Front-Brake-Rotor-Kit-KITOS811-01-kfzt

Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS811

Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS811

Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS811
CHAIN & SPROCKET COMBOS. DVDs & CASUAL APPAREL. Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS811. Galfer Tsunami 280mm rotor kits are currently used on many top race teams, including the JGR Factory Suzuki Team. High carbon, 420 stainless steel, solid mounted, oversized 280mm rotor gives more braking surface area. Laser cut, never stamped. Channel cuts provide active cooling with Increased air circulation around brake pad. Best friction surface of any stainless steel rotor. More predictable braking with better feeling lever response. Established in 2002, Lytle Racing Group is an online retailer specializing in off-road parts and accessories. With superior customer service and the finest selection of aftermarket parts, Lytle Racing Group is dedicated to serving it’s loyal e-commerce customers! Some oversized items are excluded from this program. Packages will be marked as merchandise, not as a gift. LRG stands behind all products we sell. We will then instruct you of the further steps that need to be taken. Add to Favorite Sellers. Sign up to Newsletter. View more great items. Galfer ATV Standard Size Front Brake Rotor DF731W. Galfer ATV Standard Size Rear Brake Rotor DF732W. Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS801. Galfer ATV Standard Size Rear Brake Rotor DF713W. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS811″ is in sale since Saturday, August 1, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Air Filters”. The seller is “lytleracinggroup” and is located in Midlothian, Texas. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Color: Natural
  • Type: Front Brake Kit
  • Unit of Measure: Each
  • Model Specific: Yes
  • Made in the USA: Unknown
  • Fits: Motorcycle
  • Notes: 280mm
  • Note1: Oversized Front
  • Brand: Galfer Brakes
  • Manufacturer Part Number: KITOS811
  • MPN: KITOS811

Galfer Motorcycle 280mm Oversized Tsunami Front Brake Rotor Kit KITOS811